Multi-point vibrometer based on high-speed digital in-line holography - Archive ouverte HAL Accéder directement au contenu
Article Dans Une Revue Applied optics Année : 2015

Multi-point vibrometer based on high-speed digital in-line holography

(1, 2) , (1, 3) , (1) , (1, 3) , (1, 3)
1
2
3

Résumé

This paper describes a digital holographic setup based on in-line holography and a high-speed recording to get a multipoint vibrometer. The use of a high-speed sensor leads to specificities that enable the in-line configuration to be used. The case of transient vibrations is investigated through a full simulation of the holographic process. The simulation shows that the first instants are critical since distortion may occur, resulting in errors in the phase measurement. Experimental results are provided by exciting an aluminum beam with a transient signal. A comparison with the velocity measured by a pointwise vibrometer is provided. Frequency response functions are extracted and the experimental results confirm the ability of the method to provide full-field contactless measurements at the high-speed time scale evolution of the vibration.
Fichier non déposé

Dates et versions

hal-02403198 , version 1 (10-12-2019)

Identifiants

Citer

Julien Poittevin, Pascal Picart, Charly Faure, François Gautier, Charles Pezerat. Multi-point vibrometer based on high-speed digital in-line holography. Applied optics, 2015, 54 (11), pp.3185. ⟨10.1364/AO.54.003185⟩. ⟨hal-02403198⟩
28 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook Twitter LinkedIn More