H. K?no, On the Ferromagnetic Phase in Manganese-Aluminum System, Journal of the Physical Society of Japan, vol.13, pp.1444-1451, 1958.

A. J. Koch, P. Hokkeling, M. G. Steeg, and K. J. Vos, New Material for Permanent Magnets on a Base of Mn and Al, Journal of Applied Physics, pp.75-77, 1960.

R. Skomski and J. M. Coey, Magnetic anisotropy-How much is enough for a permanent magnet?, Scripta Materialia, vol.112, pp.3-8, 2016.

J. M. Coey, Permanent magnets: Plugging the gap, Scripta Materialia, vol.67, pp.524-529, 2012.

W. Koester, Aufbau und magnetische Eigenshaften der Aluminium-Mangan-Legierungen mit mehr als 25 At.%Mn, Z.Metallk, vol.51, pp.271-280, 1960.

S. Mican, D. Benea, R. Hirian, R. Gavrea, O. Isnard et al., Structural, electronic and magnetic properties of the Mn50Al46Ni4 alloy, Journal of Magnetism and Magnetic Materials, vol.401, pp.841-847, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01949995

Z. W. Liu, C. Chen, Z. G. Zheng, B. H. Tan, and R. V. Ramanujan, Phase transitions and hard magnetic properties for rapidly solidified MnAl alloys doped with C, B, and rare earth elements, Journal of Materials Science, vol.47, pp.2333-2338, 2012.
DOI : 10.1007/s10853-011-6049-8

Q. Zeng, I. Baker, J. B. Cui, and Z. C. Yan, Structural and magnetic properties of nanostructured Mn-AlC magnetic materials, Journal of Magnetism and Magnetic Materials, vol.308, pp.214-226, 2007.

O. Kohmoto, N. Kageyama, Y. Kageyama, H. Haji, M. Uchida et al., Magnetic properties of mechanically alloyed Mn-Al-C powders, Journal of Physics: Conference Series, vol.266, p.12016, 2011.
DOI : 10.1088/1742-6596/266/1/012016

URL : http://iopscience.iop.org/article/10.1088/1742-6596/266/1/012016/pdf

O. Moze, L. Pareti, and A. Ermakov, Neutron diffraction and magnetic investigations of Ga substituted MnAl permanent magnet materials, Journal of applied physics, vol.63, pp.4616-4619, 1988.
DOI : 10.1063/1.340140

C. Anurag, Y. Rumana, and B. Ian, A comparison of ?-MnAl particulates produced via different routes, Journal of Physics: Condensed Matter, vol.26, p.64201, 2014.

J. Law, J. Rial, M. Villanueva, N. López, J. Camarero et al., Study of phases evolution in high-coercive MnAl powders obtained through short milling time of gas-atomized particles, Journal of Alloys and Compounds, vol.712, pp.373-378, 2017.

J. Rial, M. Villanueva, E. Céspedes, N. López, J. Camarero et al., Application of a novel flash-milling procedure for coercivity development in nanocrystalline MnAl permanent magnet powders, Journal of Physics D: Applied Physics, vol.50, p.105004, 2017.

M. J. Lucis, T. E. Prost, X. Jiang, M. Wang, and J. E. Shield, Phase transitions in mechanically milled MnAl-C permanent magnets, Metals, vol.4, pp.130-140, 2014.
DOI : 10.3390/met4020130

URL : https://www.mdpi.com/2075-4701/4/2/130/pdf

A. Chaturvedi, R. Yaqub, and I. Baker, Microstructure and magnetic properties of bulk nanocrystalline MnAl, Metals, vol.4, pp.20-27, 2014.
DOI : 10.3390/met4010020

URL : https://www.mdpi.com/2075-4701/4/1/20/pdf

I. Janotová, P. ?vec, I. Mat?ko, D. Jani?kovi?, J. Zigo et al., Phase analysis and structure of rapidly quenched Al-Mn systems, Journal of Alloys and Compounds, vol.707, pp.137-141, 2017.

J. H. Huang and P. C. Kuo, Influence of carbon on the phase transformation kinetics and magnetic properties of MnAl alloys, Materials Science and Engineering: B, vol.22, pp.256-260, 1994.

J. Z. Wei, Z. G. Song, Y. B. Yang, S. Q. Liu, H. L. Du et al., MnAl with high coercivity and saturation magnetization, p.4, 2014.
DOI : 10.1063/1.4903773

URL : https://doi.org/10.1063/1.4903773

H. Jian, K. P. Skokov, and O. Gutfleisch, Microstructure and magnetic properties of Mn-Al-C alloy powders prepared by ball milling, Journal of Alloys and Compounds, vol.622, pp.524-528, 2015.
DOI : 10.1016/j.jallcom.2014.10.138

H. Fang, S. Kontos, J. Ångström, J. Cedervall, P. Svedlindh et al., Directly obtained ?-phase MnAl, a high performance magnetic material for permanent magnets, Journal of Solid State Chemistry, vol.237, pp.300-306, 2016.
DOI : 10.1016/j.jssc.2016.02.031

D. C. Crew, P. G. Mccormick, and R. Street, MnAl and MnAlC permanent magnets produced by mechanical alloying, Scripta Metallurgica et Materialia, vol.32, pp.315-318, 1995.
DOI : 10.1016/s0956-716x(99)80057-0

O. Obi, L. Burns, Y. Chen, T. Fitchorov, S. Kim et al., Magnetic and structural properties of heat-treated high-moment mechanically alloyed MnAlC powders, Journal of Alloys and Compounds, vol.582, pp.598-602, 2014.
DOI : 10.1016/j.jallcom.2013.08.086

K. J. Kim, K. Sumiyama, and K. Suzuki, Ferromagnetic ?-Mn-type Mn Al alloys produced by mechanical alloying, Journal of alloys and compounds, vol.217, pp.48-51, 1995.
DOI : 10.1016/0925-8388(94)01292-p

S. Ibrahim, Phase Stability in Mechanically Alloyed Mn-30at.%Al Egypt, J. Solids, vol.28, issue.2, 2005.

T. Saito, Magnetic properties of Mn-Al system alloys produced by mechanical alloying, Journal of applied physics, vol.93, pp.8686-8688, 2003.
DOI : 10.1063/1.1544526

A. Sakuma, Electronic structure and magnetocrystalline anisotropy energy of MnAl, Journal of the Physical Society of Japan, vol.63, pp.1422-1428, 1994.
DOI : 10.1143/jpsj.63.1422

Y. C. Yang, W. W. Ho, C. Lin, J. L. Yang, H. M. Zhou et al., Neutron diffraction study of hard magnetic alloy MnAlC, Journal of applied physics, vol.55, pp.2053-2054, 1984.

T. Ohtani, N. Kato, S. Kojima, K. Kojima, Y. Sakamoto et al., Magnetic properties of Mn-Al-C permanent magnet alloys, IEEE Transactions on Magnetics, vol.13, pp.1328-1330, 1977.

C. Lee, K. Han, I. Kook, and W. Choo, Phase and lattice parameter relationships in rapidly solidified and heat-treated (Mn 0.53 Al 0.47) 100? x C x pseudo-binary alloys, Journal of materials research, vol.7, pp.1690-1695, 1992.

K. H. Han, C. T. Lee, and W. K. Choo, On the Position of Carbon Atom in the ?-Phase of Carbon-Doped Mn-Al Permanent Magnets, pp.21-28, 1993.

A. Mcalister and J. Murray, The (Al? Mn) Aluminum-Manganese system, Journal of Phase Equilibria, vol.8, pp.438-447, 1987.

G. Paolo, B. Stefano, B. Nicola, C. Matteo, C. Roberto et al.,

S. Carlo, S. Sandro, P. S. Gabriele, S. Ari, U. Alexander et al., QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials, Journal of Physics: Condensed Matter, vol.21, p.395502, 2009.

S. Gra?ulis, A. Da?kevi?, A. Merkys, D. Chateigner, L. Lutterotti et al., Crystallography Open Database (COD): an open-access collection of crystal structures and platform for world-wide collaboration, Nucleic Acids Research, vol.40, pp.420-427, 2012.

P. Giannozzi, Notes on pseudopotential generation. Scuola Normale Superiore di Pisa, 2007.

J. Eckert, L. Schultz, E. Hellstern, and K. Urban, Glass-forming range in mechanically alloyed Ni-Zr and the influence of the milling intensity, Journal of Applied Physics, vol.64, pp.3224-3228, 1988.

M. S. Degen, E. Bron, U. König, and G. Nénert, The HighScore suite, Powder Diffraction, pp.13-18, 2014.

L. Lutterotti, R. Campostrini, S. Gialanella, and R. D. Maggio, Microstructural characterisation of amorphous and nanocrystalline structures through diffraction methods, Materials Science Forum, pp.657-664, 2000.

F. Lemke, W. Rheinheimer, and M. J. Hoffmann, Sintering and grain growth in SrTiO3: impact of defects on kinetics, Journal of the Ceramic Society of Japan, vol.124, pp.346-353, 2016.

S. Kalpakjian and S. R. Schmid, Manufacturing engineering and technology, 2014.

Y. E. Mendili, J. O. Bardeau, N. Randrianantoandro, F. Grasset, and J. Greneche, Insights into the mechanism related to the phase transition from ?-Fe2O3 to ?-Fe2O3 nanoparticles induced by thermal treatment and laser irradiation, The Journal of Physical Chemistry C, vol.116, pp.23785-23792, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00817037

J. J. Wys?ocki, P. Pawlik, and A. Przyby?, Magnetic properties of the non-oriented ?-phase in Mn-Al-C permanent magnet, Materials Chemistry and Physics, vol.60, pp.211-213, 1999.

J. M. Coey, Magnetism and Magnetic Materials, 2010.

J. Thielsch, F. Bittner, and T. Woodcock, Magnetization reversal processes in hot-extruded ?-MnAl-C, Journal of Magnetism and Magnetic Materials, vol.426, pp.25-31, 2017.

T. Klemmer, D. Hoydick, H. Okumura, B. Zhang, and W. Soffa, Magnetic hardening and coercivity mechanisms in L10 ordered FePd ferromagnets, Scripta Metallurgica et Materialia, vol.33, pp.1793-1805, 1995.

D. Zhang, Processing of advanced materials using high-energy mechanical milling, Progress in Materials Science, vol.49, pp.537-560, 2004.

E. B. Herbold, J. L. Jordan, and N. Thadhani, Effects of processing and powder size on microstructure and reactivity in arrested reactive milled Al+ Ni, Acta Materialia, vol.59, pp.6717-6728, 2011.

A. Mager, Über den Einfluß der Korngröße auf die Koerzitivkraft, Annalen der Physik, vol.446, pp.15-16, 1952.

G. Herzer, Grain size dependence of coercivity and permeability in nanocrystalline ferromagnets, IEEE Transactions on Magnetics, vol.26, pp.1397-1402, 1990.

G. Herzer, Grain structure and magnetism of nanocrystalline ferromagnets, IEEE Transactions on Magnetics, vol.25, pp.3327-3329, 1989.

G. Herzer, Soft magnetic nanocrystalline materials, Scripta Metallurgica et Materialia, vol.33, pp.1741-1756, 1995.

D. Xue, G. Chai, X. Li, and X. Fan, Effects of grain size distribution on coercivity and permeability of ferromagnets, Journal of Magnetism and Magnetic Materials, vol.320, pp.1541-1543, 2008.

F. Pfeifer and C. Radeloff, Soft magnetic Ni-Fe and Co-Fe alloys-some physical and metallurgical aspects, Journal of Magnetism and Magnetic Materials, vol.19, pp.190-207, 1980.

L. Pareti, F. Bolzoni, F. Leccabue, and A. E. Ermakov, Magnetic anisotropy of MnAl and MnAlC permanent magnet materials, vol.59, pp.3824-3828, 1986.

B. D. Cullity and C. D. Graham, Introduction to Magnetic Materials, 2008.